The most frequently
asked questions are as follows.
Do
I have to pay for the upgrades?
Absolutely no! Future upgrading is free of charge for
registered users of Any Sound Recorder. [Goto
Top]
Is technical support
free?
Yes, it is
How long can I
use the trial version?
The trial version is for evaluation purpose only. For
this reason, you can only save recording or editing sound
60 seconds at first. Afer that, if you think Any Sound Recorder
is useful and you want to keep it, you need to register for
a registered version, which has full functions.[Goto
Top]
How do I download
a full trial version?
You maybe download a corrupted install package due to overload
of internet network traffic. FlashGet
is a powerful download manager. You can use it to get full
trial version. Click here
for more information [Goto Top]
I just downloaded
one of the trial versions and I can't find where I put it.
To locate the folder where a trial version is stored,
follow the route:
1> Start, Find, Files or Folders...
2> In "Named:" field enter "anysoundrecorder.*"
3> Click "Find Now" button.
Your desktop will search for the program in the system, usually
Drive C. Once you have located the appropriate file, you can
either go to the folder using Windows Explorer and double-click
on the file name, or select "Start, Run" and use
"Browse..." button to select it. [Goto
Top]
How to register?
After successfully ordering, you will receive a registration
code to unlock the trial version. Please run Any Sound Record
and input the registration name and code in the registering
dialog from menu "Help->Enter Key
Code...".
NOTE: It is strongly recommended copying and pasting
the registration name and code to the registration dialog.
[Goto Top]
How to benefit
for registered user?
1>Free upgrade for future versions.
2>Technical support via email.
3>Notification of main upgrade. [Goto Top]
How to record
from microphone?
Most sound cards provide the ability to receive sound
input from a microphone through the sound card microphone
port. This is useful for recording voice or sounds to your
computer. See Also Tutorial.
1> Check your hardware: If your microphone has never worked,
or it stopped working, first check the physical connection
of the microphone. Verify that it is firmly plugged into the
microphone port instead of the headphone or speaker port.
If you are not sure which port is correct, you can check the
sound card to see if it is marked (sometimes with a picture
of a microphone), you can use a process of elimination, check
the documentation that came with your hardware, or contact
the hardware manufacturer.
2> Open Any Sound Recorder, click "Recording Wizard"
button to popup "Record Wizard" dialog and customize
your recording work. In step two, Select the Microphone device,
adjust the recording volume for the highest possible performance.
3> Click "Record" button, and then speak into
the microphone. If the microphone is plugged into the correct
jack, the wave patterns on the display should move up and
down. If it does not move, sound is not making it through
your microphone. If the wave does move, press "Stop"
button, and then press "Play" button to listen to
your recording. [Goto
Top]
How to record
from videotape?
You can get the audio from videotape to WAV, MP3, OGG
files with Any Sound Recorder. See Also Tutorial.
1> Connect the left and right audio-out terminals on the
VCR to the line-in or microphone terminal on the sound card.
2> Open Any Sound Recorder, click "Recording Wizard"
button to popup "Record Wizard" dialog and customize
your recording work. In step two, Select the Line In or Microphone
device, adjust the recording volume for the highest possible
performance.
3> Now start the playback of the VCR and click the "Record"
button in Any Soundl Recorder. You should see a wave pattern
display of the audio as it is playing. If the volume settings
are too high, you see the wave patterns being clipped off
and appearing to fill the recording view window. If the settings
are too low, you see only very small variations in the wave
pattern. If the sound is being clipped off because the volume
is too high, move the line-in or microphone volume setting
down until most of the volume range is displayed without clipping.
If the sound is too low, increase the volume setting. Ok,
here's the trick with the line-in or microphone input. If
the recording effect is satisfactory, then stop the recording
test by clicking "Stop" button.
4> Depending on your sound card and the volume of the audio
source, you might not get enough volume using the line-in
input. In this case try the microphone input, as the volume
sensitivity through the microphone input is generally greater
than with the line-in input.
5> OK, let's rewind the tape and start the playback from
the point you want to record. Hit the "Record" button
and stand by. When you want to stop recording, just click
"Stop" button, and the destination sound file is
there. [Goto Top]
How to record
from streaming internet?
1> Open Any Sound Recorder, click "Recording
Wizard" button to popup "Record Wizard" dialog
and customize your recording work. In step two, Select the
Stereo Mix device, adjust the recording volume for the highest
possible performance.
2> Now start the playback of the WinAmp or the stream audio
from Internet and click the "Record" button in Any
Sound Recorder. Adjust the volume setting by observing a wave
pattern display of the audio as it is playing. You can pause
the process of recording by clicking the "Pause"
button any time you want and then resume it by clicking the
"Resume" button.
3> When you want to stop recording, just click "Stop"
button, and the destination sound file is there. See Also
Tutorial. [Goto
Top]
What if nothing
is recorded?
You must choose the correct recording control.
1> Click the Options button to popup Options dialog. In
the Sound Device page of Options dialog, please choose the
"Microsoft Mapper" in the device list and then press
OK.
2> Click the Input Source button on play control bar, choose
stereo mix item from input source list box.
3> Adjust recording and playback volume by draging volume
slider bar to proper position on play control bar.
4> Press Record button on play cotrol bar to start recording.
You can change input source and volume until the wave patterns
on the display should move up and down.
For more information, see also Recording
Sounds [Goto Top]
How long can Any
Sound Recorder record?
Any Sound Recorder can record as long as you wish,
the length is just limited by the hard disk space. [Goto
Top]
How do I change
color scheme of Any Sound Recorder?
Popup Options dialog and go to Color Scheme page. You
can customize your favor color scheme in this page. [Goto
Top]
Can
I save sounds to small file size?
Yes. You can choose to save MP3 or OGG file for small
size. [Goto Top]
I have more questions
- who should I write to?
Your comments are of great value to us, please email
your questions and requirement to: support@any-sound-recorder.com
[Goto Top]
|
