How do I get my license code if I do not receive it or lost it?
If you meet with any question about product delivery, product key, program registration, backup or update and more, please read FAQs on this page and important tips on "Product key" page carefully to figure out whether there are relevant answers you need. If you still have relevant question or problem, please email us.
Do I have to pay for the upgrades?
Absolutely no! Future upgrading is free of charge for registered users of Any Sound Recorder. [Goto Top]
Is technical support free?
Yes, it is
How long can I use the trial version?
The trial version is for evaluation purpose only. For this reason, you can only save recording or editing sound 60 seconds at first. Afer that, if you think Any Sound Recorder is useful and you want to keep it, you need to register for a registered version, which has full functions.[Goto Top]
How do I download a full trial version?
You maybe download a corrupted install package due to overload of internet network traffic. FlashGet is a powerful download manager. You can use it to get full trial version. Click here for more information [Goto Top]
I just downloaded one of the trial versions and I can't find where I put it.
To locate the folder where a trial version is stored,follow the route:
Start, Find, Files or Folders...
In "Named:" field enter "anysoundrecorder.*"
Click "Find Now" button.
Your desktop will search for the program in the system, usually Drive C. Once you have located the appropriate file, you can either go to the folder using Windows Explorer and double-click on the file name, or select "Start, Run" and use "Browse..." button to select it. [Goto Top]
How to register?
After successfully ordering, you will receive a registration code to unlock the trial version. Please run Any Sound Record and input the registration name and code in the registering dialog from menu "Help->Enter Key Code...".
NOTE: It is strongly recommended copying and pasting the registration name and code to the registration dialog.[Goto Top]
How to benefit for registered user?
Free upgrade for future versions.
Technical support via email.
Notification of main upgrade. [Goto Top]
How to record from microphone?
Most sound cards provide the ability to receive sound input from a microphone through the sound card microphone port. This is useful for recording voice or sounds to your computer. See Also Tutorial.
Check your hardware: If your microphone has never worked,or it stopped working, first check the physical connection of the microphone. Verify that it is firmly plugged into the microphone port instead of the headphone or speaker port.If you are not sure which port is correct, you can check the sound card to see if it is marked (sometimes with a picture of a microphone), you can use a process of elimination, check the documentation that came with your hardware, or contact the hardware manufacturer.
Open Any Sound Recorder, click "Recording Wizard"button to popup "Record Wizard" dialog and customize your recording work. In step two, Select the Microphone device,adjust the recording volume for the highest possible performance.
Click "Record" button, and then speak into the microphone. If the microphone is plugged into the correct jack, the wave patterns on the display should move up and down. If it does not move, sound is not making it through your microphone. If the wave does move, press "Stop"button, and then press "Play" button to listen to your recording.[Goto Top]
How to record from videotape?
You can get the audio from videotape to WAV, MP3, OGG files with Any Sound Recorder. See Also Tutorial.
Connect the left and right audio-out terminals on the VCR to the line-in or microphone terminal on the sound card.
Open Any Sound Recorder, click "Recording Wizard"button to popup "Record Wizard" dialog and customize your recording work. In step two, Select the Line In or Microphone device, adjust the recording volume for the highest possible performance.
Now start the playback of the VCR and click the "Record"button in Any Soundl Recorder. You should see a wave pattern display of the audio as it is playing. If the volume settings are too high, you see the wave patterns being clipped off and appearing to fill the recording view window. If the settings are too low, you see only very small variations in the wave pattern. If the sound is being clipped off because the volume is too high, move the line-in or microphone volume setting down until most of the volume range is displayed without clipping. If the sound is too low, increase the volume setting. Ok,here's the trick with the line-in or microphone input. If the recording effect is satisfactory, then stop the recording test by clicking "Stop" button.
Depending on your sound card and the volume of the audio source, you might not get enough volume using the line-in input. In this case try the microphone input, as the volume sensitivity through the microphone input is generally greater
than with the line-in input.
OK, let's rewind the tape and start the playback from the point you want to record. Hit the "Record" button and stand by. When you want to stop recording, just click "Stop" button, and the destination sound file is there. [Goto Top]
How to record from streaming internet?
Open Any Sound Recorder, click "Recording Wizard" button to popup "Record Wizard" dialog and customize your recording work. In step two, Select the Stereo Mix device, adjust the recording volume for the highest
Now start the playback of the WinAmp or the stream audio from Internet and click the "Record" button in Any Sound Recorder. Adjust the volume setting by observing a wave pattern display of the audio as it is playing. You can pause the process of recording by clicking the "Pause" button any time you want and then resume it by clicking the "Resume" button.
When you want to stop recording, just click "Stop"
button, and the destination sound file is there. See Also
What if nothing is recorded?
You must choose the correct recording control.
Click the Options button to popup Options dialog. In
the Sound Device page of Options dialog, please choose the
"Microsoft Mapper" in the device list and then press
Click the Input Source button on play control bar, choose
stereo mix item from input source list box.
Adjust recording and playback volume by draging volume
slider bar to proper position on play control bar.
Press Record button on play cotrol bar to start recording.
You can change input source and volume until the wave patterns
on the display should move up and down.
For more information, see also Recording Sounds [Goto Top]
How long can Any Sound Recorder record?
Any Sound Recorder can record as long as you wish,the length is just limited by the hard disk space. [Goto Top]
How do I change color scheme of Any Sound Recorder?
Popup Options dialog and go to Color Scheme page. You can customize your favor color scheme in this page. [Goto Top]
Can I save sounds to small file size?
Yes. You can choose to save MP3 or OGG file for small size. [Goto Top]
I have more questions - who should I write to?
Your comments are of great value to us, please email your questions and requirement to: firstname.lastname@example.org[Goto Top]